Thermaltronics TMT-9000S Soldering Iron Station Combo (100-110 VAC) w/1.78mm & 5mm Chisel Tip

$214.00

Qty

Brand: Thermaltronics
Product Code:TMT-9000S-1-AMAIN
Availability:In Stock

Tags: Maintenance, Thermaltronics, TMT-9000S, Soldering, Iron, Station, Combo, (100-110, VAC), w/1.78mm, 5mm, Chisel, Tip, Thermaltronics TMT-9000S Soldering Iron Station Combo (100-110 VAC) w/1.78mm & 5mm Chisel Tip buy in

Description

This Thermaltronics TMT-9000S 110V Soldering System Combo is an AMain exclusive, with an included Type 700 1.78mm chisel tip, and Type 800 extra large 5.0mm chisel tip. The TMT-9000S is a professional grade, lab quality soldering system that uses Curie Heat Technology. This means the iron responds to the thermal demands of each solder joint and instantly adjusts the heat supplied to the tip. So no more guessing whether or not your rheostat is set to the right temperature - the TMT-9000S automatically raises or lowers the temperature range to meet the exact requirements of the component and solder material. This also helps to prevent burns and other soldering related accidents, as the self regulating system will not get hot until it touches a metal component.

Another benefit of the Thermaltronics system, is the easy to change tips! These tips do not use a mechanical attachment like other irons and allow the tips to be swapped in seconds. Simply grab the tip using the included tip removal pad, pull the tip out of the handle, place it into the hand-piece holder, choose the tip you need to use and slide it into the handle.

Additionally, the heat range of the iron is determined by the tip you choose. Type 600 tips operate within a 617°F - 676°F temperature range (325°C - 358°C), Type 700 operate within a 662°F - 748° range (350°C - 398°C), and Type 800 operate within a 788°F - 887°F range (420°C - 475°C). This combo includes a 700 series 1.78mm and an 800 series 5mm chisel tip. Additional tips are available separately, and can be added to your cart using the menu above.

This package includes a 9000PS power supply, M series hand-piece, 700 series 1.78mm chisel tip, 800 series 5mm chisel tip, hand-piece holder, tip removal pad, brass tip cleaning curls and tip cleaning sponge, power cord and connection cable.

Features:

High thermal recovery & performance
13.56MHz power supply with built-in LCD display
Automatically raises or lowers the temperature range to meet the exact requirements of the component and solder material
LCD display identifies start up, ready mode, working mode, disconnected and error codes
Dual switchable soldering ports
Extremely compact
No calibration or operator training required
No additional coil assembly costs

Specifications:

Input Line Voltage: 100-110 VAC

Tip to Ground Potential: 2mV, true RMS 50-500Hz

Tip to Ground Resistance: <2 Ohms DC

Idle Temperature Stability: +/- 1.1°C (2°F)

Ambient Operating Temperature: 10-40°C (50°F -104°F)

Maximum Enclosure Temperature: 50°C (122°F)

Fuse: 125V 1A

Output Power (Maximum): 40 Watts RF

Output Frequency: 13.56 MHz

Size (W x H x D): 212.4mm x 118mm x 132mm

Weight: 3.47 KG